Home » Turf Protection » Matrax Flooring System Accessories

Matrax® Accessories

Accessories are an important part of Matrax event flooring systems. All Matrax mats have accessories available that enhance the appearance, function and protection of the Matrax system.

The accessories are manufactured of the same high quality High Density Polyethylene (HDPE) composite material and have the same strength and durability as our Matrax mats.

event-flooring-mat-accessories
Matrax composite ramp at Concert of Valor
National Mall 2014

Ramps

  • Dimensions: 43.75 in x 12 in
  • Weight: 13.5 lbs
  • Field Connection: pre-installed nylon cam lock system
  • ADA compliant
  • Corners available

Ramps permit the movement of vehicles and pedestrians onto and off of the Matrax panels. The ramps securely connect to the individual mats using the standard Matrax nylon cam lock system and are compatible with all Matrax mats. Available in male and female configurations to marry up with the female and male edges of the mats, the ramps can be added to any side of the mat.  They protect the edges of the mat system from damage and are ADA compliant  to easily and safely accommodate for the movement of wheelchairs, strollers, walkers and people with limited mobility.

In areas where ramps are installed on adjacent sides of a mat, corners are available to create a smooth transition from either direction of ingress or egress from the mat system and prevent a tripping hazard while protecting the corners of the mats.

The ramps are 43.75 x 12 inches in size and weigh 21 pounds each.

Edge Support Blocks

  • Dimensions: 3.75 in x 4 in
  • Weight: 5 lbs
  • Locking or non-locking available
  • ADA Compliant

Matrax panels are made to be durable and long lasting but can suffer damage along the exposed mat edges with the repeated movement of vehicles and pedestrians onto and off of the mats.

Matrax edge support blocks protect the edges of the mats from damage and extend the life-span of the Matrax panels. Edge support blocks are available in white in locking or non-locking configuration.

Matrax can provide assistance in the configuration of the matting system and the areas where ramps and edge support blocks are most needed. Whether used for event flooring, temporary roadways, portable roads, turf protection, working platforms, or construction mats maximize your investment of the Matrax flooring system with accessories.

Build Joint

  • Dimensions: 44 in long x 1.5 in high X 26 in wide
  • Weight: 26 lbs

The build joint accessory allows for a bi-directional installation when using our 4×4 turf protection system. This universal mat joint can be assembled with two male lips, two female lips, or a combination of the two creating the ultimate flexibility for installation and added efficiency in the field.  As a result of the overlapping wedge design, it is the only drivable mat build joint on the market.

T-Bar Locking Tool

  • Dimensions: 36″ L (handle: 6” W, ¾” high)
  • Weight is 5 lbs.

The waist-high T-bar locking tool is designed to provide quick and comfortable assembly. Fit the end of the tool into the notched tops of the cam-lock locking pins and rotate a quarter turn, listening for two clicks.

Fill out the form below or call us at
(855) 628-7623 to get more info.
  • This field is for validation purposes and should be left unchanged.

Matrax, Inc.

Matrax Headquarters:

Columbia, MD

Operating Locations:

Colorado
Florida
Indiana
Louisiana
New Jersey
North Carolina
Ohio
Pennsylvania
Texas
Wisconsin

Call Sales and Service Toll-Free at:

(855) 628-7623